-25 Degrees DC Inverter Air Source Heat Pumps
|Terms of Trade:||FOB,CFR,CIF|
|Min. Order:||1 Set/Sets|
|Delivery Time:||30 Days|
|Packaging:||Plywood Package Unit|
|Brand:||Amrta or OEM|
|Place of Origin:||China|
|Supply Ability:||400PCS / Month|
Model No.: ASHP()
The nominal refrigeration COP (efficiency) of Air Source Heat Pump is very high averaging over 4.2 but importantly the performance of these units in reducing ambient temperatures is also at an extremely high level. Designed to operate in ambient temperatures as low as -25ºC the range is more than capable of operating with high efficiency in winter temperatures. These units incorporate a built in heating system circulation pump, control for hot water production including Y Plan valve operation along with full weather compensation and sophisticated controls which give a very short defrost cycle of approximately 6 minutes in lower ambient temperatures.
Why this choice?
Amrta air conditioner of chillers with the EVI-cycle increase the maximum temperature difference remarkably and provide a COP up to 4.5, which makes the hot water system much more efficient.
They can be widely used in the commercial situation.
The application of EVI technology together with the high efficiency heat exchanger improves the heat exchanging rate.
Low working temperature
Units achieve optimum performance at ambient temperature as low as -25oC, ensuring 60oC hot water all year round.
Intelligent control system with the Carel controller makes it much easier to control your unit whenever you need.
The EVI compressor ensures the unit operate safely at low ambient temperature with higher efficiency and less noise.
Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
Hermetic scroll type compressor, equipped with the crankcase heater and thermal protection with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators
External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, plastic blade for low noise.
High efficiency tank type heat exchanger, factory insulated with flexible close cell material.
Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins, protected with flexible plastic grill.
Copper tube connection with charge valve, filter, sight glass, gas-liquid separator, electronic expansion valve, low pressure switch with automatic reset, high pressure switch with manual reset.
The Heat Pump unit is completed also with 4-way valve, liquid receiver and one way valve.
Without water pump and expansion tank, but with paddle flow switch.
Compressor protection breaker;
Fan motor protection breaker;
Control circuit protection breaker;
Programmable microprocessor controller
|Control methods||Electronic expansion valve|
|Condensing fan||Type||Axial, plastic fan blade||Axial, plastic fan blade||Axial, plastic fan blade|
|Max power input||kW||4.1||5.8||8.2|
|Max working current||A||18||29||36|
|Evaporator type||High efficiency tank type heat exchanger|
|Water flow||Cooling (△5k)||m3/h||1.24||1.75||2.4|
|Power supply||1N~220V 50Hz|
Jinan Amrta Air Conditioning Co.,Ltd
AMRTA specialize in commercial air conditioner and cooling system solutions for commercial and industrial use. Our products cover water chiller, Rooftop packaged unit, Heat Pump and fan coil units etc.
We AMRTA constantly build upon our history of proven innovation with new products and services that improve global comfort and efficiency.
AMRTA offer extraordinarily innovative and exceptionally reliable service, so why would you install anything but AMRTA? Please check our website
- Company Name: Jinan Amrta Air Conditioning Co.,Ltd
- Representative: Haiyan Wang
- Product/Service: Water Chiller , Air Conditioner , Rooftop Packaged Unit , Heat Pump System , Fan Coil , Air Handling Systems
- Capital (Million US $): US$5 Million
- Year Established: 2012
- Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
- Export Percentage: 61% - 70%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: No. 13788 Century Road, Jinna, Shandong, P.R.China
- Contact Person: Mr. Richard Lee
- Tel: 0086-531-88901036
Premium Related Products